| Customization: | Available |
|---|---|
| Product Name: | Hospital |
| Color: | Black and White |
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
MCS-005
What is the characteristics of us?
MCS-005 is electric operating table, which all functions are controlled by imported motor.
Sliding distance is 350mm, which can used with C-arm
Germany 12cm wheels, which is durable, beautiful and generous
It has side controller system
8cm memory sponge mattress
Big capacity battery, which can power 50-80 operation without charge
|
Main Specification |
|
|
Length/Width |
2100mm/550mm |
|
Height |
710mm-1010mm |
|
Trendelenburg/ Revers Trendelenburg |
≥25°/≥25° |
|
Lateral Tilt |
≥15°/≥15° |
|
Head Section Up/Down |
≥40°/≥90° |
|
Leg Section Up/ Down/ Outside |
≥15°≥90°/≥90° |
|
Back Section Up/ Down |
≥80°/≥20° |
|
Sliding Distance |
≥350mm |
|
Kidney Bridge Lift |
110mm |
|
Load Capacity |
250kg |
Description
Use and brief introduction
The product belongs to class I, type B. Non AP or APG device, continuous device. And possesses application part.
Engineered for increasingly complex surgical scenes, NEW comes with intelligent automatic control system satisfying various demands of general surgeries.
l Longitudinal slide up to 350 mm for free access to C-arm.
l Extreme weight load capacity of 250 kg with highest safety and stability.
l Memory pad with antistatic, waterproof design.
l Standard override panel control makes the control safer.
The operating table is widely used, easy to operate and adjust with reliable performance, which is a ideal table for different hospital.
The technical data should look at Form 1
Form 1: basic data unit:mm
|
basic
data Model |
length |
Width |
lowest height of tabletop |
Distance of elevation |
|
L |
B |
h min |
S |
|
|
MCS-005 |
≥2060 |
550 |
700±10 |
≥300 |
Gross weight:270kg,net weight:220kg,Volume(long×width×height)1360mm×860mm×880mm.
The safe working load of the table is 250kg.
The operating is formed by head plate and back plate, waist plate, buttocks plate and leg plate
Please look at the Picture 2
1-Head Plate; 2-Anesthetic Screen; 3-Shoulder support; 4-Back Plate; 5-Body support ;6-Leg support; 7-Foot Plate; 8-Kidney Bridge Handle; 9- Castor brake; 10-Arm Board; 11- Optional Control Panel; 12-castors; 13-Hand Remote; 14- Leg Plate;
Picture 2 Diagram of structure MCS-005 Electric operating table
l You can adjust the height of the table as you wish(look at picture 2),convenient for doctors.
l you can take the cushion apart from the table for clean up.
Commissioning
| Ambient temperature | 10ºC~40ºC |
| atmospheric humidify | ≤80% |
| Atmospheric pressure | 760 hPa~1060 hPa |
l The table should be kept in a clean place, never put in the places where influenced by atmospheric pressure, temperature, humidity, aeration, sunshine, or dust and sulfur.
l Please pay attention to the supply frequency,electric tension and normal impedance.
l The table should be kept separately from chemicals.
l stock in a ventilated place.
Upon leaving the factory, the operating table are positioned fit for transportation. In case of further transportation at a later date, we recommend to adjust the operating table into the same position.
l In order to transport the operating table,adjust seat and back section in to horizontal position.
l Remove the head and leg plates,and detach other accessories.
l Adjust the table-top into minimum height.
Unpacking
Any possible damage occurred during transportation should be reported immediately to Karen Wu . You will find their address and telephone no. On the last page of this operating manual.
Power requirements
|
supply voltage |
~220V±10% |
|
supply frequency |
50Hz±2% |
|
Power capacity |
≥1kw |
using
|
Ambient temperature |
10ºC~40ºC |
|
atmospheric humidify |
≤80% |
|
Atmospheric pressure |
760 hPa~1060 hPa |
){kind=link}