Vet hematology analyzer, Pet hematology analyzer, Veterinary hematology analyzer
Model: KT6200
(Thermostatic Type)
Product introduction:
1. The temperature of the table-board is available from the indoor temperature to the 50 degree centigrade.
Before the operation, 20 minutes warm-up is needed for the ordered temperature.
2. The table-board is hydraulic-lifted.
3. The right-and-left gradient is 15°, regulated by the manual machinery system.
4. The fore-and-aft gradient is 45°, regulated manually.
5. The table is designed with reasonable machinery, credible performance and simple operation.
6. The lowest height of the table-board is 820mm, and the highest is 930mm
MC-DWV-III Animal Operating Table Manual Introduction
I General Information
The sturdy DWV-III animal operating table is available for the operations of many animals such as pigs, dogs, and sheep and so on. And its reasonable and excellent machinery and credible performance make it facile and applied.
II Engineer Parameters
1) Table height: 820mm to 930mm
2) Table size:1400mm×650mm
3) Table gradient: ±15°
4) The V-top: 0 to 45°
5)Temperature: 0-50ºC
III Facture and Performance
1. The temperature of the table-board is available from the indoor temperature to the 50 degree centigrade. Before the operation, 20 minutes warm-up is needed for the ordered temperature.
2. The table-board is hydraulic-lifted.
3. The right-and-left gradient is 15°, regulated by the manual machinery system.
4. The fore-and-aft gradient is 45°, regulated manually.
5. The table is designed with reasonable machinery, credible performance and simple operation.
6. The lowest height of the table-board is 820mm, and the highest is 930mm
7.Countertops with stainless steel mesh ventilation. (Mesh disassemble)
IV Installation and Use
1) Put the table-board on top of the table base, plug into the pin, then it can be put into use.
2) When using the tray, the screw should be screwed down.
3) When adjusting the height, stepping on the pedal gently, then the table-board goes up; stepping on the pedal to the lowest and pressing the table-board gently, then it comes down.
4) The tilting mechanism works when circumgyrating the handwheel.
5) The 4 supporting screws should be locked to the groud when assembling the table. The casters will make it flexible when the screws are unlocked.
6) During the operation, the slide bar should be adjusted to the right place and fixed first, and the animal would be fastened then. If the pothook is needed, it can be inserted into the side pipe and fixed.
7) Please stop stepping firmly, if the resistance is too strong during the ups and downs,
8) Please read the manual introduction before operation.
9) Please clean the table-board after using.
V Maintainence and overhaul
1) The maintainence free of charge lasts for one year..
2) The table you bought can be exchanged for any quality problems. The spoiling caused by improper use is not in the tradition.
3) The copper bars in the hydraulic-lift pedal need lube every half a month.
4) Please handle with care during the procedures of assembly, disassembly and delivery.
VI Others
Product certification, quality guarantee and manual are attached in the packing box.
){kind=link}