Pets Animal Blood Pressure Monitor Vet Manual Sphygmomanometer Portable Ultrasound Veterinary Blood Pressure Monitor
Product Description
Features
Description of the host display interface
1. Strength of blood flowing 2. Capacity of battery (1) 6 grid: dump energy 90% (2) 5 grid: dump energy 70% (3) 4 grid: dump energy 50% (4) 4 grid: dump energy 30% (5) 4 grid: dump energy 20% (6) 4 grid: dump energy 10%
Operation of the Doppler host
One end of high sensitive probe contact with the pet the other end which is a connector need to connect with the main machine 1. Connecting the sensor to the main machine then open the power switch. The two points(point 1 and point 2) should be corresponded to insure it's connecting. And pull out the probe by pinching where there are lines. The main machine is ready for test now 2. Put some ultrasonic couplant on the top of the sensor and also the skin of the test area of the animal 3. Put the sensor on the testing area and move the sensor slowly until find the strongest pulse 4. When connect with the earphone, the loudspeaker will be closed automatically in order to help us listen the Doppler sound more clearly 5. If the power light does not work, please charge the battery of the main machine Note: Please do not test the blood pressure when charging
Operation of the Doppler blood pressure meter
1. Inflation : Close the valve and then slowly press the gasbag 2. deflation: According to the direction of the following photo , open the valve gently press the gasbag until all of the gas in the cuff has been deflated. 3. the connection and loosen of the cuffs: connect the cuffs loose the cuffs as the following pictures show
Notes
Probe: Please turn off the power immediately after usage. The probe should be protected carefully. Do not crash and collide the probe(the probe is very expensive ) with other things. Avoiding to damage the chip in the probe . Couplant: It is not allowed to use ECG viscose, baby oil and other oils except couplant. Because those oil will corrode and damage the probe. Battery: When power light become dark and speaker stop work, it is necessary to change the battery
Specification
|
Probe
|
9 MHz
|
|
Battery
|
DC 7.4V 2600mAh lithium battery
|
|
Speaker
|
4Ω 1W
|
|
Earphone
|
dual rack 270Ω 3.5mm Plug
|
|
Host
|
160mm(L) *90mm(W)*40mm(H)
|
|
Package
|
37mm(L)*31mm(W)*14mm(H)
|
Detailed Photos
Company Profile
Audited Supplier 
){kind=link}
){kind=link}