| Type: | Scraper |
|---|---|
| Application: | Burns |
| Material: | Steel |
| Feature: | Reusable |
| Certification: | CE |
| Group: | Burns |
| Customization: |
|---|
Suppliers with verified business licenses
Audited Supplier 
A. Review
Please read this manual carefully and completely before use.The Electric Dermatome (Model: MCO-OM1000)has proven their excellence and precision in numerous clinical procedures.
B. Statements
1. This manual is intended only as a reference for the operation, maintenance and repair of the Electric Dermatome (Model:MCO-OM1000).Others have no right to disclose the contents of this manual to others.
2. This manual contains proprietary materials protected by copyright law.Copyright, no part of this manual may be photocopied, copied or translated into other languages without the written consent of the company.
3. The company makes no warranty of any kind with regard to this material, including (but not limited to) the implied warranties of merchantability and fitness for a particular purpose.The company is not liable for any errors contained in this material or for incidental or consequential damages resulting from the furnishing, actual performance or use of this manual.
4. The contents of the manual may be changed without notice.
Manufacturer's responsibility
The company is only responsible for the safety, reliability and performance of the instrument under the following conditions:
· Assembly operations, expansion, re-adjustment, improvement and repair are carried out by personnel approved by the company;
· The relevant electrical equipment complies with relevant standards;
· The instrument is used in accordance with the operating instructions.
Note:This instrument cannot be used at home.
C. Description
1 scope of application:
A thin layer is removed from a healthy part of the body during a skin grafting operation.
2 product performance, structural composition:
The Electric Dermatome is composed of 1 power supply ,1 handpiece, 4 width plates, 1 power cord,1 screwer,1 box disposable dermstome blades.
3 contraindications:
Systemic disease intolerance to surgery; wounds have a large number of tendons, bone tissues, nerves, blood vessels and others exposed.
4 introduction:
a. The Electric Dermatome is a surgical skin graft device.The thickness of the skin graft is taken from 0-0.75 mm in 0.05 mm increment.
b. There are five sizes width plates:25 mm, 38 mm, 51 mm, 76 mm, 102 mm for choice.
d. Two stainless steel screws secure the width plate of the corresponding width below the c. handpiece.The tool holder of the above width can be easily tightened or removed by the screwer.
D. Using steps
a. The Electric Dermatome should be cleaned and sterilized before use. Do not immerse it in water or detergent.(See introduction for cleaning and sterilization).
b. Observe the precautions for aseptic handling established by the hospital.
c. Insert the connector plug of the Dermatome Handpiece into the socket corresponding to the power supply, and plug the external power cord into the corresponding socket of the power supply.
d. The switch on the front of the main unit is in the off (O[off]) position before the power is turned on.The safety lock is in a safe position.Power is turned on through the power outlet connector located on the back .
e. Turn on the switch on the front of the main unit's power supply at the "on[ i ]" position, and the switch will start to illuminate.Press the switch button fully and activate the unit when the safety lock is in the on position.Return the safety lock to the switch in the "off[o]" position without using the instrument.
f. When performing the setting operation, visually check for damage/wear. If found, do not use the device and contact the manufacturer in time.
Installation of Dermatome Blade
A new sterile blade should be used for each operation.
a. Place the switch button in the off "o[o]" position.Place the Electric Dermatome in the safe position and slide the safety lock on the switch button to the safe position .
b. Select the width plate of the appropriate width and use a screwer to loosen the screws on the width plate about 2 turns.Do not remove the screws from the Dermatome Handpiece.
c. Place a new blade in the Handpiece slot.To replace the blade, remove the old blade before inserting the new blade.
d. The drive pins and the openings in the blades are paired with each other.Note: The indication "Insert With This Side Up".
e. There is no need to lubricate the blade because the blade back seal is self-lubricating plastic.
f. Choose the width plate of the right width to meet the cutting needs.Place the width of the width plate over the blade and tighten the screws.Do not overtighten.Make sure that the printed side of the width of the width plate faces outward.
Cut the skin graft
a. The skin should be prepared in a conventional manner.
b. There is no need to lubricate the skin; however, the use of sterile mineral oil to lubricate the donor site can make the electric area knife move more smoothly.
c. Set the lever adjustment knob to point to the desired thickness. The factory calibration is generally 0.05mm by default. Do not insert any instruments between the blade and the lever, as this may damage the blade or cause cracks, thus enabling the cutting ability. decline.And it may affect the accuracy of picking.
d. Place the hand piece at an angle of 30 to 40 degrees above the donor site.
e. In order for to operate smoothly, firstly, lift the switch button lever and slide the safety lock from the safe position toward the hose connection.You should be able to see the word ON.For best results, it is recommended to take the dermatome at full speed.To ensure full speed is reached, the switch control button should be fully depressed and the safety lock in the ON position.
f. Turn the switch button on to start cutting.Guide the part forward by gently pressing down to ensure that the cutting edge is always in close contact with the donor site.
Two methods of removing the skin graft from the device:
Method 1:
The cut skin graft is accumulated in the storage bag of the handpiece.The handpiece is lifted from the donor site to end the cutting of the skin graft.The recovery switch button is placed in the safe position and the skin graft is carefully removed.
Method 2:
When the skin graft appears in the storage bag, gently lift the skin with tweezers.Do not stretch or pull the grafted skin as this may result in irregular edges and uneven cuts.Lift the handpiece from the donor site to introduce the cutting of the transplanted skin.The recovery switch button is placed in the safe position.
Note: Do not operate the Electric Dermatome for a long time without cutting.
g. Turn off the power switch of the main unit and unplug the main unit.Remove the used blade and place it in a container made by the hospital.Restore the instrument and Width Plate to the established toolbox and send it for cleaning.
Remove of Dermatome Blade
a. Loosen the screws of the Width Plate.Do not remove the screws.
b. Hold both sides of the Width Plate and lift it up and remove it.Do not lift the Width Plate forward as this will cause contact with the blade and may cause injury.
c. Carefully lift the blade from one side to remove it.
d. Place the used blade in a hospital-specified treatment unit and dispose it.
E. Warnings and precautions
Warning
aveat
In order to use the device safely and continuously, the instructions listed must be read.The instructions listed in this manual are not a substitute for medical procedures already in progress.
l In order to ensure the normal use of this device, it must be installed and debugged by our professional installation and commissioning engineers.
l Before operating this device, the operator must read this manual and follow the instructions carefully.
l The use environment of this device should meet the requirements in the manual. The non-conforming use environment will result in unstable performance of the device, shortened service life and serious damage.
l We are not responsible for any damage or loss caused by incorrect operation of the contents of the manual and the damage or loss caused by the installation, commissioning, repair, modification, etc. of our installation and commissioning engineers.
l Do not disassemble the casing by yourself.
l You may not disclose, copy or reproduce all or part of this User's Guide to a third party without written permission.
l The items described in this instruction manual may be subject to change without prior notice.
l In order to prevent possible damage to the equipment and to yourself or others, please read through the following safety precautions before using this equipment.Keep these safety instructions in a place that is easily accessible to anyone who uses this product.
l Environment and dehumidification
1. Do not immerse the handpiece into water and other liquids.
2. We can not guarantee that the device can be used in the presence of flammable substances such as oxygen or nitrous oxide.
3. We can not guarantee that the device can be used in spaces with strong magnetic fields (including but not limited to MRI).
4. When the device is transported or stored, the ambient temperature may not be used beyond the limits mentioned in the manual.
5. Do not use a device when the control section does not work as described in the manual.Please return it to the factory for repair immediately.
6. When connect the power cord to the output connector, use only the cord supplied by the company.Please follow the product specifications for maintenance.
7. When running the device, make sure that all cords are fully inserted into the correct interface.
(It is not recommended to disassemble it. Otherwise, the inside of the product may be damaged. When the equipment fails, only the professional technician from the company can repair the product. When the product is damaged due to falling or other accidents, it is sent back to the company for repair. )
l The device must be monitored by a trained operator. Even experienced operators must carefully read all the instructions.
l All users of the device must ensure that the instrument is used within the scope of local policies or national regulations.
l The device cannot be used with other implantable or external electronic stimulation devices.
Precautions
n Visually inspect the equipment for damage and wear.
n Carefully inspect the power cord for cracks or insulation failures caused by overuse or mishandling.
n Check for possible scratches, nicks, or burrs caused by overuse or mishandling.
Note: Continued use is prohibited if it is found to be damaged or worn that may affect the function of the device.
a. The company's obligations under this warranty do not include freight, other charges, and are not responsible for direct, indirect or eventual damage or delay caused by improper use, replacement of parts that not authorized by our company .
b. This device is not intended for use in the following categories: abnormal use; unmaintained or damaged device; replacement or damage to the original serial number or manufacturing mark of our company.
c. The company reserves the right to modify the device specifications without prior notice.
e. The company makes no warranty of any kind with regard to this material, including (but not limited to) the implied warranties of merchantability and fitness for a particular purpose.
G. cleaning and sterilization
a. The main body of the Electric Dermatome and its accessories should keep the main unit and accessories clean.If there is pollution, it should be cleaned first and then disinfected.
b. In order to avoid long-term damage to the product, we recommend that the hospital's regulations consider that the product should be disinfected or that the main unit and accessories should be sterilized according to the following rules:
1. Disinfection and sterilization frequency: clean and disinfect once a month,
2. Disinfection and sterilization method: The surface of the main unit is wiped, and the hand piece is recommended to be steam sterilized.
Note: Ethylene oxide sterilization is not recommended as it will be difficult to determine a reliable exhaust time for a lubricated power unit.
Specification
|
Model |
MCO-OM1000 |
|
Anti-shock type |
1 |
|
Protection against electric shock |
BF type application part |
|
Anti-liquid grade |
IPX0 |
|
Operating mode |
continue to operate |
|
Maximum operating ambient temperature |
31ºC |
Recommended steam sterilization parameters for handpieces:
|
Sterilization type |
Set temperature |
Exposure time |
Drying time |
|
Pre-vacuum gas sterilization |
132-133ºC |
4 minutes |
At least 8 minutes |
|
Air gravity displacement steam sterilization |
132-133ºC |
35 minutes |
At least 8 minutes |
|
Air gravity displacement steam sterilization |
121-123ºC |
60 minutes |
At least 8 minutes |
|
Note: If you have "TSE/vCJD" contaminants, follow the requirements of the World Health Organization.Sterilize for at least 134 ° C for 18 minutes |
|||
More Details:
1. After the infected population or suspected infected population is used, the part of the patient's contact should be disinfected.
2. Do not immerse the device in liquid when cleaning and disinfecting.Do not allow liquid to flow into the detector's connection socket and case to prevent damage to the main unit.
clean
1. The host power must be turned off before cleaning the handpiece.
2. Soak a soft, lint-free cloth with mild soapy water or a non-corrosive, diluted detergent.
3. Carefully hold the device. If it falls or is damaged accidentally, return it to the company for repair, do not continue to use.
4. Never contact the device with any chemical solution.Some solutions can corrode metals and precision moving parts and can also weaken internal lubricants.
5. Never put the handpiece in the ultrasonic cleaner.Ultrasonic cleaning removes bearing grease and causes the device to run poorly.
a. During the cleaning process, simply wipe the outer circumference of the connection socket without wiping the inside of it.Remove the cleaner after cleaning and do not leave the cleaner on the surface.
b. Clean the main unit power supply should use non-erosion cleaner.
c. Most detergents must be diluted before they can be used.
d. Do not use abrasive materials for cleaning.
Suppliers with verified business licenses
Audited Supplier 
){kind=link}
){kind=link}