Physiotherapy equipment orthopedic cervical traction bed lumbar traction bed
Product Description
Product principle
The traction force feedback control method is adopted to feed back the parameters input by the operator to the control system to increase and reduce the force in real time, thus realizing the longitudinal traction of the patient's cervical and/or lumbar spine.
Scope of application
It is used by operators with relevant medical knowledge in medical units to perform traction treatment on patients' cervical and/or lumbar spine.
Product Parameters
Technical parameters:
1. Digital Tube. Key operation;
2. Gross weight: 137kg size: 2720mm * 720mm * 920mm;
3. Net weight: 90kg size:2450mm * 600mm * 730mm;
4. Built-in 8 traction modes (continuous traction mode, continuous up-stair traction mode, intermittent traction mode, intermittent up-stair traction mode, intermittent up-and-down traction mode, repeated traction mode, repeated up-stair traction mode, and repeated up and down ladder traction mode);
5. The adjustable range of cervical traction force: 0~300N. The step length is 1N. When the traction force is adjusted to more than 200N, a warning will be issued and the operator will be asked to confirm;
6. Adjustable range of lumbar traction: 0~990N, step length is 1N;
7. The average rate of change of traction force during the gradual and regressive phases of cervical traction is 60N/s;
8. The average change rate of traction force during lumbar traction in the progressive and regressive phases is 90N/s;
9. The equipment has a real-time monitoring function of traction, with a tolerance of ±30N;
10. Adjustable range of treatment time: 0~99min, step length is 1min;
11. Adjustable range of traction phase time: 0~9min, step length is 1min;
12. Adjustable range of intermittent phase time: 0~9min, step length is 1min;
13. The equipment has emergency protection measures. During the traction treatment, by pressing the emergency button, the traction can be relaxed to the initial state;
14.Stroke range: sliding stroke range: 0 ~ 200mm
15. back plate length: 700mm, leg plate length: 1250mm
16. The maximum weight of the patient that can be supported by the traction bed is 180kg.
17. The maximum weight of the patient that can be supported by the traction chair is 180kg.
18. The equipment has a heating mattress, and the heating function can be turned on or off separately.The maximum temperature does not exceed 41ºC;
19. ★ This product has obtained the copyright of computer software;
){kind=link}