Intermediate Frequency Computerized Electrotherapy Apparatus

• Customization: Available
• Type: Electric Computer Controlled Rehabilitation Tilt T
• Function: Electric Computer Controlled Rehabilitation Tilt T
• Model NO.: MCT-ZP-IC
• LCD Display: Without LCD Display
• Group: Adult
• Supply Voltage: 220V±22V, 50Hz±1 Hz
• Intermediate Frequency Range: 2kHz~6kHz
• Intermediate Modulation Frequency Range: 0~150Hz
• Intermediate Modulation Frequency Wave: Sine, Square, Triangle, Exponential, Sharp, Sawtoo
• Modulation Mode: Variable Frequency and Alternating Modulation
• Intermediate Frequency Modulation: 25%, 50%, 75%, 100%. Franchise Is ±5%
• Intermediate Frequency Output Current: 0mA ≤output Current≤ 100mA
• Temperature Range of Electrode Plates: 38~55
• Transport Package: Wooden Package for Export
• Specification: CE
• Trademark: MeCan
• Origin: Guangzhou
• Production Capacity: 1000sets/Month

Product Description

Intermediate Frequency Computerized Electrotherapy Apparatus
and Ultrasonic Physiotherapy Device

Model:  MCT-ZP-IC






Product performance:

1. Normal working conditions:
a) Environment temperature:+10ºC~+40ºC
b) Relative humidity:30%~5%
c) Atmosphere pressure:700hPa~1060hPa
d) Rated power source:AC220V, rated frequency:50Hz
2.Rated input power:85VA
3.Host device overall dimension:L440mm,W360mm,H132m,Allowable error±20mm
4.Output channels: two-channel medium frequency with diathermy output, two-channel iontophoresis DC output, two-channel interference electrical output
5.Electrode line: 1800mm,permissible difference ±100mm
6. Square electrode plate:No.4. L:107mm,W:72mm,tolerance ±10%
No.6.L:95mm,   W:60mm, tolerance ±10%
No.7.L:85mm,   W:55mm, tolerance ±10%
Circular plates: φ40mm in diameter, tolerance ±5mm
7.Working frequency:1kHz~10kHz,Single frequency tolerance±10%
8. Modulation frequency:0~200Hz,Single frequency tolerance±10%
9. Medium frequency carrier waveform: two-way square wave, pulse width: 85us ~ 250us, tolerance ±10%
   Medium frequency modulation waveform: sine wave, square wave, triangular wave, exponential wave, sawtooth wave, sharp wave, etc
10.Modulation types: continuous, intermittent, intermittent, variable frequency, undense and alternate models
11. Medium frequency modulation amplitude: 50%, 75%, 100%, tolerance ±5%
12.Interference electrical performance: dynamic rhythm 4s ~ 10s; Different frequency change period is 15S~30S
13.Medium frequency treatment prescription:0~99 optional
14.Intermediate frequency(IF) output current: under the load of 500Ω,each channel of output current ≤100mA,0~99 adjustable
15. Output current stability: the change rate of output current under different loads should not be greater than 10%
16.Peak voltage of intermediate frequency: the peak voltage of the mid-frequency output shall not exceed 500V when measured in the open road condition.
17. Operation: when the output set to the maximum value, the output end will be run 10min first, then the short circuit runs for 5min. The therapeutic device should be able to work properly.
18. Temperature range of electrode plate:38ºC~55ºC, 6 gears adjustable, tolerance ±3ºC
19. Iontophoresis output current: under the load of 500Ω,each channel output current not more than 50mA, 0~99 adjustable.
20. Power plate: a qualified product with a class of medical device record certificate should be selected.
21.Treatment time: the IF treatment time is already in the prescription, there is sound cue when treatment time enough, then output stop. Tolerance ±1min
22.Load impedance: the effective load impedance is 500 Ω. The influence of technical indicators can be ignored when the rated load impedance varies in the period of ±10% 
23.Operation mode: running continuously.